1 of 1 030201 DS9096P ibutton ? ? ? ? adhesive pads www.dalsemi.com features low-cost permanent attachment method for ibutton readily attaches ibutton to any smooth flat surface available in die-cut rolls of 500/roll with a core inner diameter of 76 mm (3 inch) excellent u.v. resistance in outdoor weathering tests and weather-o-meter tests 24 months shelf life at 21c and 50% relative humidity ideal application temperature 21c to 38c; minimum application temperature 10c; maximum long term temperature 71c dimensions 15.2 dia. 0.6 63.5 all dimensions are shown in millimeters. description the DS9096P is a made of white, double-coated acrylic vhb ? foam tape (3m part number 4932) that is die-cut to match the diameter of ibutton devices. the pads allow i buttons to be attached to virtually any smooth surface. the DS9096P offers an excellent long-term holding power for use in many interior and exterior industrial applications. the DS9096P works best on low surface energy substrates, including most metal, sealed wood and glass, as well as many plastics, composites and painted surfaces. porous (e.g., concrete) or fiberous materials (e.g., wood) will require sealing to provide a unified surface. materials such as copper, brass, plasticized vinyl may require priming or coating to prevent interaction between adhesive and substrate. bonding to glass, ceramic tile or other hydrophilic surfaces in a high humidity environment may require the use of a silane coupling-agent to help ensure a long-term bond. rough surfaces created by light abrasion may actually be detrimental to bond strength. before applying the DS9096P, clean the surface of the objects thoroughly with a mixture of 50% isopropyl alcohol and 50% water and wipe it dry. bond strength is dependent upon the amount of adhesive-to-surface contact developed. firm application pressure develops better adhesion contact and thus improves bond strength. for good surface contact apply enough pressure to ensure that the tape experiences approximately 15 psi (100 kpa). typically, uniform thumb pressure on the ibutton will achieve the desired result. at room temperature approximately 50% of the ultimate bonding strength is achieved after 20 minutes, 90% after 24 hours and 100% after 72 hours. for complete tape information see http://www.3m.com/bonding/pdf/501622.pdf "vhb" is a trademark of 3m.
|
